Bearing Removal

First Rate Bearing Removal Recommendations

First Rate Bearing Removal Recommendations

Are you looking for bearing removal?


Here's Bearing Removal Selections:

Motion Pro Blind Bearing Removal Set 08-0292...

Customer Review:
Click Here for More Info


$230.95

 

OTC 4581 Slide Hammer And Blind Hole Bearing Pulle...

Customer Review:
Click Here for More Info


$199.95

 

Advanced Tool Design Model ATD-8621 Rear Axle Be...

Customer Review:
Click Here for More Info


$43.51

 

OTC 7208A Front Hub Installer and Puller...

Customer Review:
Click Here for More Info


$59.95

 

Park Tool Press Fit Removal Tool for Internal Bott...

Customer Review:
Click Here for More Info


$44.95

 



korek api
 
Today's Discussion

Ford F-150 96 driveshaft carrier bearing removal from the shaft?
2 piece drive shaft, 3 u-joints and a slip yoke, to pull the carrier bearing assembly off the shaft ... I removed the support bracket, cut off the rubber cushion, but how does the non-rotating part w a flange (bearing shield?) come off the shaft? Is it threaded? Pressed on? should I use a puller to remove it?

Reply
Wisdom
I used to use an air chisel to remove them, but suggest you buy the replacement parts first and take them to a machine shop to be replaced. Why destroy a new bearing because you don't own the proper tools?

halsca
Better still take you entire drive shaft to a shop that specializes in it? They don't charge any more for the parts than a typical auto parts store and generally the labor is only like 37 dollars.

boogie_4wheel
The bearing is pressed on, and they are a PITA to get off. Just take the shaft to a driveshaft place, the dealership will cost way more money, and usually a driveshaft place will have the parts you needed.




Related Images
                

Related News
Tue, 22 May 2012 13:19:52 GMT
HPEV Issued Patent That Could Simplify Manufacturing in Motors, Generators and ...
MarketWatch (press release)
Current methods for removing heat from bearings in rotating devices are expensive. A 10000 horsepower motor, that is liquid cooled, requires an auxiliary motor and pump to continuously force lubricating and cooling fluid through the bearings to prevent ...

and more »
Tue, 22 May 2012 16:18:03 GMT
ABB-Dodge to show easy maintenance bearings at Hillhead 2012
Agg-Net (press release)
The ABB-Dodge Grip Tight mounted ball bearing unit prevents shaft damage and incorporates a patent-pending removal system that cuts costs by reducing disassembly time and shaft maintenance. The integrated bearing puller makes for easy disassembly, ...